USB Modem APN Settings

How to enter unlock codes:

Remove original sim, Insert other network sim card, plug to PC USB the it will ask for the Unlock Code. Enter Unlock Codes. (don't try to guess numbers, Maximum 10 tries or it will be permanently locked/blocked) We calculate codes via online server.

DashBoard Download Links:

http://www.mediafire.com/file/wyeztmfyq1m/Mobile Partner (3).rar (GENERIC-No Operator Logo)

http://www.mediafire.com/file/ow0t4hentek/Mobile Partner (Globe Visibility).rar Globe Visibility (Mobile Partner)

http://www.mediafire.com/file/ymdg1i4qkym/Smart Bro.rar Smart Bro

http://www.mediafire.com/file/envk0zxdfzz/SBW_USB_STICK_MODEM_UPGRADE_GUIDE.zip SBW_USB_STICK_MODEM_UPGRADE

(extract ZIP, open folder and install SETUP)

Ultra Snow Release!

Ultrasn0w for iPhone 3G is ready!

1. Ensure you have upgraded to iPhone OS 3.0
2. Jailbreak your iPhone 3G using redsn0w or PwnageTool (this will also install Cydia/Icy)
3. Run Cydia or Icy
4. Please add the repo repo666.ultrasn0w.com to Cydia or icy
5. Search for ‘ultrasn0w’ in cydia or icy and install ultrasn0w
6. Reboot your iPhone 3G
7. T-Mobile USA users should disable 3G before using ultrasn0w
8. Enjoy

iPhone 3Gs – Teardown and Analysis

Those Apple Engineer’s really know how to pack a PCB. They’ve managed to fit almost everything onto the “top” of the main logic board. The 3Gs’ PCB makes the 3G’s PCB look sparse (the apostrophes were probably a little bit confusing there).

Let’s take a minute here to talk about the new Applications Processor Core. Apple has chosen to go from the ARM 11 Samsung S3C6400 to the ARM A8 Samsung S5PC100 with this device.



This is the single largest difference between the 3G and the 3Gs. Firstly the manufacturing process has been chopped from 90nm to 65nm. Pipeline depth has been boosted to 13 – stage from 8. More importantly the clock speed of this newer processor rolls in at 600MHz – opposed to the 412MHz core of the old – obsolete 3G. Samsung has also doubled the quantity of L1 cache from 16 to 32KB.Moving around the rest of the PCB – it’s easy to notice the similarities with the previous 3G device. The Power Amp wins once again went to Triquint and Skyworks. We also see the NAND flash going to Toshiba – which as far as phoneWreck is concerned is fairly surprising. The battery has been bumped from the previous 1150mAH to 1219mAH – a much needed upgrade. Only time will tell if Apple’s claim of increased battery life will hold. Once again the psuedo SRAM win goes to Numonyx. The BaseBand Processor appears to have similar markings to the previous 3G therefore we can assume it’s an Infineon. This has been paired with the Infineon PMIC. The Applications Processor mentioned Earlier (Samsung S5PC100) is paired with a PMIC courtesy of what appears to be NXP. It’s mounted with a DDR SDRAM coming in at 256MB.

Underneath the logic board we have a little surprise! A new combo chip from Broadcom (BCM4325) This puppy packs 802.11a/b/g and Bluetooth 2.1 (+EDR and FM). This is a fairly substantial change from the Marvel and CSR combo on the old – obsolete 3G.

We’ve received some rumours and speculation about the other devices we weren’t able to ID. There is a guess from a few readers that the GPS chip may be the same as on the previous 3G – the Infinieon Hammerhead II. This may be true but the new package is a different size – this means that it could incorporate the compass hardware as well.

That said, we’ve had some rumours that the compass chip is the Asahi Kasei – AK8973. We’ll still have to do some more digging!

We’re currently in the process of performing a much more thorough analysis. Keep checking back for more details as they come – we’ll most likely be putting this device through it’s paces to see how it stacks up with the Palm Pre and BlackBerry Bold & Storm.

Thanks again to the wonderful people at ifixit for gracing us with these great photos! If you want to see how it’s taken apart, make sure to check out their teardown.

Stay tuned and keep wrecking!

Dr.Wreck

Link

http://www.phonewreck.com/2009/06/19/iphone-3gs-teardown-and-analysis/

PSP Repair Hints 1.0a/ PSP: Universal Unbricker To Unbrick/Downgrade/ Restore Any PSP To 5.00m33-4

Your Guide for Reparing PSP!

THANKS to Raygun!

Download Here!

and HERE!


PSP: Universal Unbricker To Unbrick/Downgrade/ Restore Any PSP To 5.00m33-4
This tutorial will guide you through the process of creating a "Pandora's Battery" and a "magic memory stick," which when used in conjunction can unbrick, restore, and downgrade any PSP firmware. Apart from TA-088 v3 units, the process works on all previous "Phat" and Slim PSP hardware revisions to date.

Requirements

* A working, homebrew-capable PSP running at least 3.X OE / M33
* Memory Stick Pro Duo with at least 128MB of space
* PSP Battery

Known compatible batteries:

* Sony PSP 1800mAh Battery Pack
* Sony PSP 3.6v - 1200mAh
* Datel PSP Battery 3600mAh 2X
* Datel PSP Battery 1800 MaxPower
* Sony PSP-280 2200mAh
* Atomic Battery Pack 3.6v 1800 mAh

NOTE: PSP units equipped with a TA-085 v2 motherboard or above cannot convert a battery to Pandora. Hellcat's Pandora utility should warn you beforehand if your system board is incompatible.

Installation: Creating the Magic Memory Stick

1. First boot up the PSP into recovery mode (hold R during boot) and make sure the GAME folder homebrew setting is set to 3.X Kernel. Exit recovery mode.

2. Insert the memory stick into the PSP.

3. Navigate to System Settings -> Format Memory Stick on your PSP. Format the memory stick.

4. Connect your PSP in USB mode.

5. Download Hellcat's Pandora Installer for 3.XX Rev 3b

6. Extact the Pandora Installer using WinRAR or any similar utility. Inside, look for a "pan3xx" folder. Copy this folder to "X:/PSP/GAME" on the memory stick.

7. Exit USB mode. Now navigate to the Game menu on your PSP and execute Hellcat's Pandora Installer.

8. Once successfully loaded, you should see a screen similar to the one pictured below.



9. Warning: this will delete all data from the memory stick. Backup any files before proceeding. Press R+X, and confirm with R+L+X to repartition and format the memory stick for Pandora.

10. Restart the PSP and connect it in USB mode once again.

11. All folders and files from your memory stick should be wiped, so create a "PSP" folder and then create a "GAME" folder inside of the "PSP" folder.

12. Once again, copy the "pan3xx" folder to "X:/PSP/GAME" on the memory stick.

13. Download the 1.50 update and save it as "UPDATE.PBP" without the quotes.

14. Copy the 1.50 update to the root of your memory stick (X:\UPDATE.PBP, if X is the drive letter of your PSP).

15. Exit USB mode. Now navigate to the Game menu on your PSP and execute Hellcat's Pandora Installer.

16. Press X to install a 1.50 firmware, containing Pandora, to the memory stick.

17. When the process is finished, press L+X to install the IPL. Now exit the application.

18. Connect the PSP in USB mode.

19. Download Time Machine 0.1

20. Extract the RAR using WinRAR or similar utility. Inside, you should see a "TIMEMACHINE" folder. Copy this to "X:/PSP/GAME" on the memory stick.

21. Exit USB mode. Now navigate to the Game menu on PSP and execute the application "Time Machine"

22. You should now be presented with the following screen:



From here, first choose "Install IPL loader on PSP MS boot sector," then select "Convert Pandora/DC1-DC4 IPL into TM format." Now exit the application.

23. Connect the PSP in USB mode.

24. Download Despertar del Cementerio v8

25. Extract the ZIP using WinRAR or similar utility. Inside, you should see a "DC8" folder. Copy this folder to "X:/PSP/GAME" on the memory stick.

26. Download the 5.00 update EBOOT file.

Once finished downloading, the file should already be named as 500.PBP.

If the file name matches, then copy it to the memory stick root (i.e. X:/, if X is the drive letter of your PSP).

27. Exit USB mode. Now navigate to the Game menu on PSP and execute the application "Despertar del Cementerio v8"

28. While installing, the application will ask you which key(s) you would like to bind DC to. Hold UP on the directional pad.



29. After installing the files, the program should exit back to the XMB. That means installation was successful and you are now in possession of a "magic memory stick."

Installation: Converting a Battery to Pandora

Note: If you have just followed the steps above to create a magic memory stick, steps 1 and 2 below can be safely ignored.

1. Download Hellcat's Pandora Installer for 3.XX Rev 3b

2. Extract the Pandora Installer using WinRAR or any similar utility. Inside, look for a "pan3xx" folder. Copy this folder to "X:/PSP/GAME" on the memory stick. Exit USB mode.

3. Navigate to the Game menu on your PSP and execute Hellcat's Pandora Installer.

4. Upon launching the application, take note of these four options:

• Press O to convert battery to Pandora
• Press [] to convert battery to normal
• Press R+O to write battery serial to file
• Press R+[] to restore battery serial

First, you will want to press R+O to backup your battery serial. If for any reason you'd like to convert your battery back to normal in the future, press R+[] to restore the battery serial. This is the preferred method for restoring your battery back to its previous state.

If by chance you forgot to back up the battery serial and still would like to convert your battery back to normal, choose the second option by pressing [].

Once you're ready, press O to convert your battery to Pandora.

5. You now are in possession of a Pandora Battery. Booting a PSP with this battery inserted will boot to service mode instead of the normal PSP XMB.

Usage: Unbrick / Downgrade / Restore Any PSP

Note: If you are performing the following steps on the same PSP you used to create the battery with make sure to remove and then reinsert the battery.

1. While holding UP on the directional pad, boot the PSP with a magic memory stick and the Pandora Battery inserted.

2. You will be presented with a menu containing the following options:

• Install 5.00 M33-4
• Install 5.00 OFW
• NAND operations
• Hardware Info
• Test M33
• Shutdown
• Reboot Device

Select "Install 5.00 M33-4" to begin the installation process.

3. Memory stick LED should begin flashing. Wait 2-5 minutes for the install to complete.

4. Now press X to complete the installation - it's imperative that you do this.

5. Boot up the PSP with a regular non-Pandora battery. You may be presented with a BSOD, but just press X or O to restore settings.

6. And that's it. You're now running 5.00 M33-4.

***GeoHot*** Releases iPhone 3GS Jailbreak (Use Ultrasn0w For Unlock)

GeoHot has released a jailbreak for the iPhone 3GS called purplera1n. Currently it is windows only but a mac version is expected soon.

Improvements:
- Vista, Windows 7, International, 64-bit support
- Less flakiness in the payload
- Cydia tar cleaned up
- Improved logging with slightly more useful errors
- New kernel patches, codesign errors gone. Props posixninja
- Added vm_map +x, passed vm_check
- No winterboard yet, but now that ball is in Saurik's court :-D

Download Here

Its Beta Version
Use At Your Own Risk

Jailbreak Guide
Unlock Guide

How to Tweak Smart Bro

How to Tweak Smart Bro

Hello Guys, Recently I'm looking for a way on how to speed up my Smart Bro Internet. I've tried to search from forums and blogs and i found this.

HOW TO TWEAK SMART BRO/SMART WIFI

SMART BRO CANOPY FIXING

Step 1: Accessing your SmartBro Canopy
1. Open your browser. I prefer Firefox.
2. Type this address: http://169.254.1.1 - This is your canopy Admin site.





Step 2: Accessing your SmartBro Canopy
Now, let's check what COLOR CODE you are in:
1. Click TOOLS on the left menu.
You will be brought here:





Step 3: AP Evaluation
1. Click AP Evaluation tab on the top menu.
You will be brought here:





Step 4: Checking what Color Code (station) you are hooked
Now, here's the highlighted part is your current COLOR CODE or simply base station (that's what they say. see the attached image below). Note the following fields:

Range: 490 feet - means how far your canopy to the receiving station.
Color Code: 10 - the code of the receiving station - this is the one that you should change
SectorUserCount: 12 - the number of users connected to it. the lesser the better.

This are the 3 primary concerns when you are evaluating your connection in this page.






Step 5: Changing your COLOR CODE (station)
Ok now, let's change station or COLOR CODE.

1. Click Configuration on the left side menu.
2. Then click Radio Tab on the top menu.

You will be brought to this page: See the field for COLOR CODE?





Step 6: Saving your New Settings (color code)

Now, where will you get your color code? Remember the AP Evaluation, The list we found there is the all the list of color code. This is were we choose. Though here it says (0-254) is not valid. Even your canopy detected the available color codes. So, for this example i used number 11.

1. Enter your desired colored code. Example: 11
2. Then click Save Changes.

Your page should look like this:






Step 7: Rebooting your Canopy
Notice the RED notice? "Reboot Required". So ...
1. Click the Reboot button.
Your page should look like this after clicking the button.





Step 8: Finalizing
After you click reboot, you will be disconnected from your network. See the image below. Network disconnected. Just wait for a few moments while your canopy is rebooting.




Step 9: You are now connected!
NOW you are connected. Your page should look like this. The Network monitor will pop up which means you are now connected.

When you see that you are now connected, You may now click the "here" to proceed.









Finally here's the final page should look like. And you're ready to surf again.

Unlocking Huawei E220 modem for free

Unlocking Huawei E220 modem for free

Are you sick of the operators of internet you fool, you'll steal and plunder you?

Are you tired of having to pay a fixed monthly money, to have a permanent contract, not knowing how much money you will never pay that next bill, constantly recharging the SIM card?

Solution is simple, safe, legal and cheap!

Listed below are the steps needed unlock a usb modem Huawei E220 locked by any operator to use with any card. No need to release anything more than a few programs and follow a few steps. No cd's, virus free and ensuring that users of this website has always worked.

Download the package with all necessary utilities. For just over 1 Euro will have a program that will unlock your Huawei E220. You can choose two ways to pay by phone or via SMS. Receive codes that need to type in this box. When you hit "send" button will download the files you need. No virus, no problems and that really works.

You should do the following:

NOTE: If you have any questions or a problem with any of the steps to be followed, please write to geonix7@gmail.com and I will help you.

STEP # 1. INSTALLING DRIVERS:

Do not connect the HUAWEI yet.

Install drivers Huawei E220 running Windows XP:

Folder 01_Drivers_Huawei_e220_libre-MOBILE_CONNECT/AutoRun.exe

Step No. 2 .- INSTALLING THE NEW FIRMWARE FREE:

Connect Huawei (without SIM card) to your computer and install:

02_firmware_huawei_e220 folder / E220Update_11.117.10.00.00.B268.exe

Your computer will detect and configure the USB Modem Huawei E220.

When finished, disconnect the modem.

Turns off and on your computer, and connect the modem.

Step No. 3 .- Run 03_qmat/qmat.exe option: Forensic Hardware -> Use Com / USB Port

Step No. 4 .- Select Huawei in our Serial Com Port: Cmd and click Send

we'll see some lines in the hex table status ...

Step No. 5 .- Choose Read EFS on section Diag Functions and click Lets go. Efs.bin as the file name and wait a few minutes until it is finished running (about 64Mb)

NOTE: You will see a screen to register. Do nothing and let the process finish. Clicking OK will close the program and cut the generation of the file.

Step No. 6 .- Open efs.bin with 04_xvi32hex/XVI32.exe and search for the sequence: 53 64 2C 00. The 8-digit number that appears on the right side (near Sd .. 4438n .... xxxxxx) is the unlock code. We noted.

Step No. 7 .- Run 05_E220 SimLock_UnLock.exe enter the unlock code listed above and click OK.

READY!

From now on the Huawei E220 is free to use any SIM with any operator.

Simply unplug the Huawei, choose the SIM card you want and plug it again.

Phoenix Service Software 2009.20.10.39068

Phoenix Service Software 2009.20.10.39068
Released on 20.07.2009

New release - new improvements to the setup:
- Phoenix is now preconfigured to use USB connection,
- Setup asks for uninstallation of all the remaining drivers and runtimes (previously they were kept in case they were in use by other programs),
- Setup size reduced by 15 MB.

Original Release Information:
-DK2 Dongle Driver v 7.14.0.25
-Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver version 6.85.15.0)
-Flash Update Package 09.23.12.4
-FLS-x Dongle Driver v 2.09.28
-FPS-11 version 5.10.0

Changes/improvements made from previous version 2009.12.7.38366
New products supported:
-RM-540, RM-590, RM-591, RM-572, RM-586, RM-541, RM-536, RM-535, RM-537, RM-570, RM-531, RM-558, RM-555, RM-553, RM-600, RM-497, RM-599, RM-573, RM-504, RM-455

Product support removed:
-RM-568, RM-562, RM-563

Error corrections & changes:
-New FLS-x Drivers improving FLS-5 stability
-Flash Update Package 09.23.12.4
-Menu changes:
-Product Verification removed from Product – menu
-Layout of Firmware Update / Options UI in Flashing – menu update
-Display Tune for S60 products removed from Tuning – menu
-PPC / FaultLog Archive & Send removed from Tools – menu
-Following obsolete Licence Automation – related menu items removed. Due to this change only Tucson system with related Phoenix menu items can be used for restore / variant change activities.
-Certificate Restore ( BB 5.0 generation products)
-IMEI /ESN Rebuild (DCT-4 generation products)
-Variant SWAP (DCT-4 generation products)
-Label Printing can be configured to use manual selection for Country Of Origin. Product specific data package may contain new label printing configuration in XML format. Please see product specific Technical Bulletins for further instructions.
-Operating Band reading / writing works only in test mode.

http://rapidshare.com/files/258159131/Phoenix_2009.20.exe


http://www.mediafire.com/file/idoylt...9.20.part1.rar
http://www.mediafire.com/file/myzqgm...9.20.part2.rar
http://www.mediafire.com/file/zmy5r0...9.20.part3.rar
http://www.mediafire.com/file/wtfett...9.20.part4.rar
http://www.mediafire.com/file/ykztmj...9.20.part5.rar

Nokia N97 Hardware problem repair solution

N97 Mic repair

N97 FM repair

N97 Headset repair

N97 Ringer repair

Click Here To Download

Unlock Samsung Omnia aka I900

Unlock omnia instructions


1. Download lock.zip

2. copy .lnk to omnia

3. Open Lock.lnk

4. Write MCC/MNC , which phone have...


5. Write new NCK (12345678)

6. Press OK

7. Run Status.lnk to check if locked

8. Run Unlock.lnk

9. Insert code (12345678)

10. Done




File is here.


Click Here To Download

Unlock A707 with multiloader for FREE

unlock your A707 with multiloader for FREE

-install Samsung_USB_Driver
-connect Phone to USB
-open "FastMultiLoader V3.28"
-then select MODEM
-Rscr1
-Rscr2
-FactoryFS
-Click "port search"
-THEN click " DOWNLOAD"


firts download



MULTILOADER


A707_patch modem

Rsrc1

Rsrc2

FactoryFS

MOMO Design MD-3 Direct Unlock Free

Unlock MOMO design MD-3 freeeeeeee

Now with VodaStar new upgrade Ver 4.16 you can Unlock
MOMO Design MD-3 for free

for download ver 4.16 from here rar file password is 0000

can also watch video from here

unlock using Original USB cable , it is same cable as MOMO design MD-2 also same as F230 and F156


unlocking is so simple same as all USB phones

1- switch phone on without sim, be sure modem setting on phone is USB

2- connect phone to clip USB and never toutch any key on phone after that

3- press unlock on clip

4- wait phone totaly restart and clip will blink 2 times green

5- test with sim card will be all ok



big thnx to chuckyIt for provide MD-3 samples , for his test and help

New Modified Pm for BB5 models

All Nokia BB5 New Modified PM, Bandchange RPL, Erase File, And Etc..

Nokia 3110c RM-237.rar
Nokia 3250 RM-38.rar
Nokia 3500c RM-272 v2.rar
Nokia 3500c RM_272.rar
Nokia 3500cb RM-273.rar
Nokia 5200 RM-174 v2.rar
Nokia 5200 RM-174.rar
Nokia 5300 RM-146 v3.93.rar
Nokia 5310 RM-303.rar
Nokia 5500 RM-86.rar
Nokia 5610d RM-242 v4.81.rar
Nokia 5700 RM-230.rar
Nokia 6085.rar
Nokia 6086 RM-188.rar
Nokia 6110n RM-122 SW 04.22.rar
Nokia 6120c RM-243.rar
Nokia 6125 RM-178 4.20 v2.rar
Nokia 6125 RM-178.rar
Nokia 6126-6133b RM-126.rar
Nokia 6131 RM-115 SW 5.50.rar
Nokia 6151 RM-200.rar
Nokia 6233 RM-125.rar
Nokia 6233 RM-145.rar
Nokia 6233i RM-72.rar
Nokia 6234 RM-123.rar
Nokia 6267 RM-210.rar
Nokia 6270 RM-56.rar
Nokia 6280 RM-78 v2.rar
Nokia 6280 RM-78.rar
Nokia 6288 RM-78 SW 06.10.rar
Nokia 6290 RM-176.rar
Nokia 6300 RM-217 v2.rar
Nokia 6300 RM-217.rar
Nokia 6300b RM-222.rar
Nokia 6301 RM-322.rar
Nokia 6500c (China) RM-397.rar
Nokia 6500c RM-265.rar
Nokia 6500s RM-240.rar
Nokia 6555 RM-271.rar
Nokia 6630 RM-1.rar
Nokia 6680 RM-36.rar
Nokia 6681 RM-57.rar
Nokia 7310 RM-379.rar
Nokia 7370 RM-70.rar
Nokia 7373 RM-209.rar
Nokia 7390 RM-140.rar
Nokia 7500 RM-249.rar
Nokia 7900 RM-264.rar
Nokia 8600 RM-164.rar
Nokia 8800arte.rar
Nokia 8800arte_no308.rar
Nokia E50 RM-170 v2.rar
Nokia E50-1 RM-170.rar
Nokia E50-2 RM-171.rar
Nokia E51 RM-244.rar
Nokia E60 RM-49.rar
Nokia E61 RM-89.rar
Nokia E61i RM-227.rar
Nokia E62 RM-88.rar
Nokia E65 RM-208 SW 2.0615.30.rar
Nokia E70 RM-10.rar
Nokia E71 RM-346.rar
Nokia E90 RA-6.rar
Nokia N70 RM-84.rar
Nokia N71 RM-67.rar
Nokia N72 RM-180.rar
Nokia N73 RM-133 v2.rar
Nokia N73 RM-133.rar
Nokia N75 RM-128.rar
Nokia N80 RM-92.rar
Nokia N81-1 8GB RM-179.rar
Nokia N81-3 RM-223.rar
Nokia N82 RM-313.rar
Nokia N90 RM-42.rar
Nokia N91 RM-43 v1.rar
Nokia N91 RM-43 v2.rar
Nokia N93i RM-156.rar
Nokia N95 8Gb RM-320.rar
Nokia N95 RM-159.rar

LG SHINE LG 510 unlock

1º Go to phone it types *#06#, then it shows the IMEI code
2º Later you it types this code IMEI in the program
Warning
necessary that it is typed correctly error-free not to have problems
When to finish to type the IMEI, the Code to unblock is under (UNLOCK CODE).
3º It types in the phone
2945#*9701#
or
2954#*5101#
Made this it appears in cellular " To insert code"
It types what it appeared in the program
Finally! Phone unblocked
If you liked. He is thankful to me
Post your result.
Regards to all

Click Here To Download

How To Unlock SpvC600 New Version

TO UNLOCK LATEST VERSION OF SPV
HERE IS A SIMPLE GUIDE

FIRST HARD RESET SPV PHONE
TO DO THIS(SWITCH OFF PHONE>HOLD BOTH SOFT KEYS SITUATED UNDER NEITH LCD. AND THAN KEEP PRESSING THEM PRESS POWER BUTTON FOR 2 SECONDS.IT WILL SHOW ON SCREEN PRESS "0" TO COMPLETE NOW RELEASE KEYS AND PRESS "0"
IT WILL HARD RESET AND PHONE WILL TAKE SOME TIME TO COME ON AND MAY BE IT WILL ASK AGAIN TO RESTART SO DO SO.

AFTER HARD RESET

1. INSTALL ACTIVE SYNC VERSION 4.5.0 WORKS FOR ME
2. CONNECT PHONE TO COMPUTER WITH A V3 CABLE.
IF SOFTWARE ASKS CONNECT AS GUEST.

3. COPY FILE ATTACHED WITH THIS POST SP_AllowCertificate
IN UR PHONE WITH ACTIVE SYNC
JUST SAY IN MY DOCUMENTS>MY MUSIC

4. GO IN PHONE FILE MANAGER MY DOCUMENTS>MY MUSIC AND FROM THERE RUN SP_AllowCertificate
IT WILL INSTALL IT. JUST FOLLOW ON SCREEN INSTRUCTIONS.

5. NOW SECOND FILE. EXTRACT ON DESKTOP OF UR PC/LAPTOP
WHICH IS SDA_ApplicationUnlock

6. NOW RUN IT FROM PC/LAPTOP
IT WILL ASK U TO CLICK ON UNLOCK.
DO SO


7. NOW EXTRACT
SPV-Services
AND RUN SPV SERVICES

MAKE SURE KEEP PHONE CONNECTED WITH PC SYNC DURING ALL PROCEDURE AND KEEP INTERNET CONNECTED.

8. IN SPV SERVICES
CLICK SIM TOOLS
THAN IT WILL ASK TO TYPE "AGREE"
AND THAN UNLOCK IN NEXT SCREEN.
AND ALL DONE.

Click Here To Download

Click Here To Download

Click Here To Download

New version All Mobile LCD Finder

Nokia LCd Finder
Samsung LCD Finder
Sonyericsson LCD Finder
Motorola LCD Finder
And Many more


Click Here To Download

China Phones GPRS Setting in Philippine

Setting Account

GLOBE


Account
Account Name: myGlobe GPRS
APN: http://www.globe.com.ph
User Name:
Password:
Authority Type: Normal

Profile
Name: myGlobe WAP
Home Page: http://2.g.myGlobe.com.ph/main/wap/main.do
Data Account: myGlobe GRPS
Connection Type: HTTP
Proxy Address: 203.177.042.214
Proxy Port: 8080
User Name:
Password:


SMART

Account
Account Name: Smart GPRS
APN: smart1
User Name:
Password:
Authority Type: Normal

Profile
Name: SMART WAP
Home Page: http://wap.smart.com.ph
Data Account: SMART GPRS
Connection Type: HTTP
Proxy Address: 010.102.061.046
Proxy Port: 8080
User Name:
Password:


SUN CELLULAR


Account
Account Name: SUN GPRS GPRS
APN: WAP
User Name:
Password:
Authority Type: Normal

Profile
Name: SUN WAP
Home Page: http://www.suncellular.com.ph
Proxy Address: 202.138.159.078
Proxy Port: 8080
User Name:
Password:


Note IN SUN CELLULAR AND GLOBE, WE MUST FIRST ACTIVATE OUR SIM CARD FOR GPRS THEN MANUALLY SET IT USING THE FORMAT

Motorola Sagem Panasonic Alcatel NEC Hardware Repairing

Motorola hardware repair
Siemens hardware repair
NEC hardware repair
LG hardware repair
Samsung hardware repair
Sagem hardware repair
Panasonic hardware repair
Alcatel hardware repair

Click Here To Download

Sonyericsson Flashing Without Box

Each Sony Ericsson phone has an inbuilt software and these softwares gets updated with lot of fixes for bugs and enhancements. But when the new version of software is released, how do you update the software? In this post I will discuss how to update the firmware or Software of your Sony Ericsson phone.

Requirements:

Java Runtime Environment which can be downloaded from here.
http://www.java.com/en/download/dt_v...s_jre=1.6.0_13

Sony Ericsson PC Suite which is available in the CD or you can download from SE website.
http://www.sonyericsson.com/cws/supp...0i?lc=en&cc=sg

Sony Ericsson Update Service or SEUS Software.
http://www.sonyericsson.com/cws/supp...0i?lc=en&cc=sg

Drivers for your phone which is available in the CD provided witht the phone
http://ma3-origin.extranet.sonyericsson.com/drivers/
Flash player
After you install all the software, run the SEUS software. First it will check for any updates. First time when SEUS is used, the animation screen stays for some time. Next you get a screen where you need to select the language you want to display. Now your phone is ready for update and click start to update the phone.
Dcu-60 usb cable





Next you will be prompted to select the type of connection and for this you need to see the bottom of the phone. Select the proper connection type.





Next you have to accept the terms and conditions for updating. Once you accept you will be taken to the main update screen shown below.





Please follow the instruction very carefully. Your battery needs to be charged fully. Turn off the phone, remove the SIM card and replace the battery. Now press and hold C button on your phone and plug the USB cable to the phone.





Once you get this screen, you can release the C button. Your phone will be detected by the software and it will mention the latest software version the phone is currently using and the updates available. If there is no update available, there will be an option to continue, otherwise select the update and proceed. Once you select this, the phone starts updating. Please do not touch the phone while updating as any connection issues with USB will lead to failure of update.
Finally when the update is finished you get this screen.

Nokia Hardware Library

Click Here To Download
Click Here To Download

Nokia 1650 Complete Hardware Repair Solution

Nokia 1650 Sim ways
Nokia 1650 buzzer ways
Nokia 1650 Display jumpers
Nokia 1650 ear phone repair
Nokia 1650 jumper repair
Nokia 1650 vibra repair
Nokia 1650 local mode solution
Nokia 1650 Light jumpers
Nokia 1650 charging repair solution
Nokia 1650 keypad jumper
Nokia 1650 signal problem
Nokia 1650 radio problem solution

Click Here To Download

E90 Hardware prblem Repair solution

E90 Kaypad ways
E90 Kaypad ways1
E90 LCD jumpers
E90 On off switch
E90 MMC corupted
E90 MMC Problem
E90 LED ways jumpers
E90 Charg problem
E90 charge repair solution
E90 Sim ways

Click Here To Download

BB5 new Pm files

Click Here To Download